Tag Archives: BoS

Resin Roundup June 2017

By Maz Woolley

All photographs have been supplied by the manufacturers who hold the copyright for the images.

Here are a few of the recent announcements of resin models from Matrix and from Best of Show (BoS) and Neo. All these models are moulded in resin in China in various scales stated below.

Matrix

The models shown below are to 1:43 scale and are for release between June and August 2017.

MX50806-031 Hispano Suiza K6 Break de Chasse Franay #15121 green metallic 1937 expected June
MX50102-081 Alfa Romeo 2000 Praho Touring dark green 1960 expected June/July
MX51705-111 RR Phantom II Continental Figoni & Falaschi Berline #2MS black 1932 expected July
MX51608-011 Pegaso Z-102 Thrill Coupe red / black 1953 expected August

Neo

 

All the Neo models listed are to 1:43 scale and should now be available.

MG TD MkII, white, RHD, 1950
Chevrolet Special De Luxe Convertible, beige, 1941
Dodge Sportsman, San Diego Police Ambulance, 1973
Hudson Italia, silver, 1954

 

Best of Show (BoS)

1:18 scale

These models should all now be available.

Chevrolet Apache Pickup, light blue, 1959
Dodge Coronet Club Coupe, light blue/white, 1952
Rover P5B Coupe, Dark green and light grey, RHD, 1971

1:87 Scale

 

These models should now be available.

Mercedes 600 Pollmann, Black, 1969, hearse
Buick Century Caballero, red/white, 1958

 


We welcome your comments and questions.   Please go to our Model Auto Review Facebook page,  or email us at maronlineeditor @ gmail.com.

Recent Announcements 5/17

By Maz Woolley

All photographs have been supplied by the manufacturers.

Here are few models recently announced that have caught the eye.

LS Collectibles

These models have been recently announced. They are moulded in resin to 1:18 scale for France.  As is so often the case with detailed 1:18 resin models there are no opening parts.

The Porsche models are not of 911 or Boxster variations for a change and look to capture the real cars very well. The Mitsubishi GTO is a car seldom seen on the road now but certainly looks a nice model in black. Finally we get another Dodge Viper a model that may sell better outside the UK where we saw few of them.

LS016A Dodge Viper GTS 1996

LS019B Mitsubishi 3000 GTO 1992

LS021A/B Porsche 944 Turbo S

LS022A Porsche 928 S4

Minichamps

A mixed group of releases here. Racing cars again dominating the release. Models are diecast in China for Germany unless otherwise stated.

Porsche 906K Vögele and Siffert – Sebring 12 hours 1966.

A classic late 60s shape with sloping front and Kamm tail. A lot of detail like sun strip and lights seems to be included.

Porsche 917/10 Kauhsen and Dr, Heinemann “Farewell in the snow” Nürburgring 1973,

This model is to 1:18 scale and shows how much advertising has grown over the years with a minimal sponsorship livery.

 

 

Renault Sport Formula One team R.S.16 – Kevin Magnussen – 2016 1:43 resin

Renault team cars from the end of 2016 modelled to 1:43 scale in resin.  Models for someone who has to have the whole grid or for fans of Renault or the individual drivers.

Renault Sport Formula One team R.S.16 – Jolyon Palmer – 2016 1:43 resin

 

McLaren Honda MP4/5 Ayrton Senna 1989

This model is to 1:18 scale and is bound to be popular with Senna fans. Sadly McLaren’s current form makes one wonders if their drivers will ever be seen on the podium again.

McLaren Ford MP4/8 Ayrton Senna 1993 

This model is to 1:43 scale and even MInichamps web site does not state what material it is made of.

 

MaxiChamps

BMW 520 – 1972 – Silver or Yellow

These budget re-releases from the Minichamps back catalogue are nice models capturing the BMW 5 Series of the early 1970s which was a very popular car.

Best of Show

ModelCarWorld originally produced some Neo models to 1:87 with photo-etching and a lot of detail. These appear to have been regarded as much too expensive by 1:87 scale collectors and so MCW is releasing its 1:87 models at a lower level of detail and at a lower price point as Best of Show. Many of the models presented have already been seen in BoS or Neo 1:43 ranges. When compared to the detail and accuracy of Herpa, Wiking, and Brekina I think that BOS models leave a lot to be desired. Oversized window frames and rather crude wheels seem to be common. However, they do focus on models that the main German 1:87 producers would not release. Some of their latest releases are shown below.

All models are moulded in resin in China to 1:87 scale for Germany.

Mercedes 180 (W120) Bakkie, BoS-Models, 1:87

Aston Martin DB5, BoS-Models, 1:87

Opel Manta B Mattig, BoS-Models, 1:87

 

Jaguar XJ-S, BoS-Models, 1:87


 

 

Resin Roundup – March 2017

By Maz Woolley

 

This posting is a round up of some of the recent releases in resin which have caught my eye. All photographs on this page are from the manufacturer or retailers.

Auto Cult

1:18 Scale

Adler Trumpf Rennlimousine 

This 1:18 Scale model of this streamliner from Adler has already been released in 1:43 scale by Auto Cult.  The 1:18 scale version is now being made available.


1:43 Scale

Here are the 1:43 scale resin models made in China for Auto Cult of Germany. These form the second and third releases of 2017.

Bizzarini Machinetta  Engineers limited production series

Giotto Bizzarrini is best known for his association with super cars like the Ferrari 250 GTO and for the V12 engine that powered Lamborghini cars from 1963 on. The Machinetta was made when he was a mechanical engineering student at the University of Pisa. It is a  re-bodied Fiat 500 Topolino with a tuned engine and revised chassis. It was apparently a project completed towards his degree.

Ford Mach 2 Concept Prototypes series

The Mach 2 concept was a design and engineering study created by Ford’s design chief Gene Bordinat for a mid-engined sports car inspired by GT race cars that could replace the Cobra. The concept made its debut at the 1967 Chicago Auto Show and featured many off-the-shelf Mustang components, including its front suspension, front and rear brakes, and most notably the 289 cubic inch V8 engine which was placed behind the driver.

The car had a clean design to it with European looks but it was shown but never put into production.

Morris J-Type Delivery Vehicles series

The Morris Commercial J-type was a 10 cwt van launched by Morris Commercial in 1949 and produced until 1961. The van followed the emerging trend of having forward controls and sliding doors on each side. It was made in both left and right hand drive versions. The J type was fitted with a 1476 cc four-cylinder side-valve engine based on the one used in the Morris Oxford MO. Many of these vans were used by the Post Office and other public bodies. But as presented by Auto Cult it is a nice example of a plain van.

Audi 100 type Bischofberger Camping vehicles series

This car from the early 1980s is built on an Audi 100 Saloon. Inside the real camping car was a fridge, a sink, a stove, a table, and two sofas which can be transformed into a double bed. Pictures show it to be rather cramped inside. Bishofberger also did conversions on less glamorous platforms such as the Transporter and VW Golf Pickup.

Ford Model T “The Golden Ford” Early Beginnings series

This model is based upon a recently restored vehicle originally built by Arthur Edward George, an engineer and car racer. who’s firm patented the first trolley jack. Initially raced as a stripped chassis it won the all Ford race at Brooklands in 1912, were Henry Ford was said to be an interested spectator. The car became The Golden Ford the following year when it had a narrow single seat body of polished brass added to it.

Steyr-Puch Adria TS Brands of the past series

This car was created by Otto Hölbl Karosseriewerk of Vienna in Austria. It was based upon the Steyr-Puch 700 chassis which was in turn an Austrian version of the Fiat 600. 18 cars were hand built in during 1960-61.

Reyonnah Little cars series

This company was created in France by Robert Hannoyer. Its name is the founders in reverse. The only vehicle made was a small four-wheeled vehicle with a relatively wide track at the front and a narrow track at the rear. The vehicle offered space for two, seated one behind the other, following the same basic lay-out as the better known Messerschmitt. A single-cylinder engine from AMC or Ydral of 175 cc or 125 cc powered the rear axle via a three speed manual gear box and chain drive.

An unusual feature of the car was that the front wheels could be adjusted to make it narrower so it could slide into a motorcycle parking place. The wheels had to be adjusted outwards before the car could be driven away. The car appeared at the Paris Motor Show for at least three years from 1950 till 1952 but poor sales meant that then faded into obscurity.McQuay-Norris Streamliner Streamliner series

McQuay-Norris was a maker of car parts such as piston rings and steering wheel knuckle bolts. It also produced and distributed electrical controls for gas appliances. In January 1936 McQuay-Norris produced a fleet of six cars called aluminium eggs due to their strange appearance. The cars were released in New York and in other locations in the United States. Each car was a part of testing of pistons, piston rings, and other engine parts manufactured by McQuay Norris. The bodies of the aluminum eggs were mounted on chassis of cars of different brands. They were driven in the United States, Canada, and Mexico, in different climates and highway conditions. The cars featured a streamlined design which reduced air resistance. Streamlining was effective in enabling the installation of fifteen instruments used in component testing.


Matrix

 

Many of the models already advertised are now shipping and just one new announcement has been made recently of a new model to 1:43 scale in resin made in China for the Netherlands.

 

MX40408-011 Delahaye 135M Antem Convertible 1949

Another model of classic coachwork on a Delahaye chassis. This car was shown at the 1948 Motor Show and evolved into the 1949 car modelled here. Elegantly keeping separate wings whilst incorporating the headlights to give the car a more modern feel. The rear wheels were hidden behind a fairing, in a nod to the trend for aerodynamic styling. A formula which was also used by Jaguar for the XK120.

MX 41203-021 Lancia Aurelia (B52) B-Junior Ghia 1952

An interesting model but a rather clumsy re-styling of the Aurelia which was rather better looking to the editor’s eye than this expensive offshoot!

Neo

 

Neo continue to release models with the latest announcement being of the Lancia shown below. These are resin made in China to 1:43 Scale for Germany.

213730 Lancia Flaminia 3C 2.8 Coupe Speciale Pininfarina 1963

Spark

Releases are mainly focused on Grand Prix., Le Mans and other racing cars currently where Spark and Minichamps both seem to be focusing quite strongly.  Both the models shown are resin made in China to 1:43 scale.

S4268 Lola MK4, No.15, Bowmaker Racing Team, GP Deutschland, 1962

This includes a figure of the driver Roy Salvadori. The car debuted at the 1962 Dutch Grand Prix and was powered by Coventry Climax engines. It was a mixture of a tubular frame and welded panels making it a semi-monocoque. John Surtees had success with the car at the Australian and New Zealand Grand Prix but it was outclassed by competitiors like Lotus and faded away its final swansong being wining the Rome Grand Prix in 1963 driven by the privateer Bob Anderson.

S3587 Spice SE 87C, No.131, Graff Racing, 24h Le Mans, 1988,

Spice raced cars fitted with Cosworth engines and had some class wins at Le Mans. This car was run by Graff Racing who are still racing today.

Mini Minieri

Continuing to focus upon rare and stylish cars these models are resin made to 1:43 scale.

MMIBT001 Jaguar B99 2011 Bertone

This was a concept car designed and developed by the Italian design house Bertone. It was on the Bertone stand at the 2011 Geneva Motor Show. The 4-door saloon was shown in two versions: compact executive (B99) and grand tourer (B99 GT). Featuring  suicide doors and a low height it had a hybrid power train with a 1.4 Litre engine for range extension purposes with two electric motors of 201 bhp each driving the rear wheels. The B99 name is derived from B for Bertone and 99 for Bertone’s 99th year in operation.

Best of Show

 

Here are some of the recently launched 1:18 scale resin models made in China for ModelCarWorld of Germany.

CHRYSLER Imperial LeBaron 4-door Hardtop, 1971

DODGE Dart Phoenix, 1961

Ford Ranchero Pick-up 1979

 

Chevrolet Corvette Corvair Concept


We welcome your comments and questions.   Please go to our Model Auto Review Facebook page,  or email us at maronlineeditor at gmail.com.

Interesting Comparisons, Or Then Again, Maybe Not

By Graeme Ogg

A package arrived this week containing the BoS Chevrolet Caprice wagon. Not always keen on BoS models, some of them have quite drab or insipid colours and weak-looking trim detail, and look built down to a price (which of course they are). But I’d say this wagon looks pretty good.

Caprice_wagon_BoS

I did my own version some years ago, based on the fairly crude Road Champs sedan, so couldn’t resist comparing them side by side. The main thing that strikes you is the apparently huge difference in length, although that impression is partly due to the Road Champs being too tall in the body and sitting high on oversize wheels, making it look dumpier. Still quite a striking difference in the look of the two models, though.

Caprice_wagons_3.rdJPGCaprice_wagons_1rd

I wondered if the RC body was too short in 1:43, or the BoS version was a little too flattened and stretched, so I got the calipers out. I have the BoS sedan (the New York taxi version – also one of their better models) and surprisingly the RC and the BoS sedans are identical in length at 128 millimetres.

Caprice_taxis

The real sedan was 17’10” (5435 mm) long, which in 1:43 should be 126 mm so both models are pretty close, although the excessive height of the RC makes its proportions less convincing.

Caprices_BoS_2

The wagon was 18’4″ (5740 mm) in length and in 1:43 that is 133 mm. The BoS wagon is spot-on, whereas my version lacks the rear-end stretch so comes up short. Mind you, 6 inches in 1:43 is only 3.5 mm, and the BoS wagon has a stretch of just under 5 mm, so it’s surprising just how much longer it looks compared with the taxi.

But the real moral of the story is – give a nerd a cheap pocket calculator and he’ll bore the socks off you.


Valiant_wagons_1rd

Also in my package were the BoS Valiant sedan and wagon. They are OK, but not exciting. They will go on a shelf to fill a gap in the 1960s Yank section, but will never be much of a turn-on.

Valiant_wagons_2rd

And of course I also did my own Valiant wagon some time ago, so once again a comparison was in order. I think I come out of it pretty well, all things considered, but obviously my views are not entirely unbiased. By the way, mine does actually have the “valley” down the middle of the roof, it just didn’t show very well in the photos.

Valiant_wagons_3rd

Since my wagon is based on the Trax model of the Australian Valiant, there are small detail differences which nerdy nitpickers might criticise as “unauthentic and un-American”. But we don’t have people like that around here (loud cries of “Damn right we don’t”) so I may just get away with it.

Thank you for listening.


This post was originally published in Diecast Forum 43.  We welcome your comments and questions.   Please go to our Model Auto Review Facebook page.