Category Archives: DeSoto

The 50,000,000th Ford in 1:43

By Karl Schnelle

All text and photographs provided by the Manufacturer.

Two 1/43rd scale hand built white metal models of significant cars in automotive history were introduced at the 2019 National 1:43rd Scale Model Car Expo. The Expo was held in conjunction with the Countryside Toy Collectors Show, March 17th in Countryside, IL, USA. They are the 50,000,000th Ford produced, a Colonial White Fairlane 500 Galaxie 4-door sedan and the 2,000,000th DeSoto built, a Firedome Sportsman hardtop in Pearl White/Castilian Red, both by WMCE. It just so happened that these milestone cars were both manufactured in the 1959 model year.

The actual Ford had been the property of and on display at the Henry Ford Museum in Dearborn, Michigan until it went to auction and is now in private hands.

There is no record as to the whereabouts of the 1959 DeSoto. These cars were both one-offs and were used for dealer promotional purposes back in the day.

A very limited number of these white metal models are now available. For more information, please visit www.route66modelcarstore.com or phone Buz in the US at 708-246-1543.


We welcome your comments and questions.   Please go to our Model Auto Review Facebook page,  or email us at maronlineeditor at gmail.com.

Brooklin Latest February 2019

By Maz Woolley

All text by, and copyright of the Author. All photographs provided by the Manufacturer.

Brooklin has recently shared some pictures of their latest models. Please note that the first three are pre-production tests with decals rather than photoetching on their sides. The final model is a test casting and is missing its vacform and rear bumper.

As the photographs show the level of detail on the models continues at the higher level introduced over a year ago.

All these models are cast in white metal in the United Kingdom nd are to 1:43 scale.

BML-28 1934 Chevrolet 2-door sedan


BML-29 1942 DeSoto DeLuxe Foor Door Sedan


BRK227 – 1957 Pontiac Safari Two Door Station Wagon


BRK-226 Buick GS 455 Hardtop

As can be seen the castings from Brooklin are rather thinner than they used to be and the chromed castings finer too. The increased use of chromed cages to represent the window surrounds has also increased the level of realism on the 1950s models in particular.


We welcome your comments and questions.   Please go to our Model Auto Review Facebook page,  or email us at maronlineeditor at gmail.com.

London Toyfair 2019 Part Three

By Maz Woolley

All text and photographs by, and copyright of, the Author unless otherwise stated.

This the third in a short series of articles based upon the Author’s recent visit to the London Toyfair, a large trade show featuring toys of all kinds, where vehicle models for the UK market are shown by wholesale importers as well as Hornby and Oxford Diecast. The previous article about the Hornby stand can be found here.

This article shows some of the models displayed on the Oxford Stand. With so many models in production the stand has an impressive display of hundreds of models in various scales.

Last year I tried to photograph models through glass in the crowded display cabinets and the pictures were not very good. This year the Oxford representatives on the stand were extremely helpful and got out a number of items for me to photograph. Although I photographed quite a few models I did not capture all the novelties on display. A few have been photographed in the cabinets as there wasn’t time to get out every model that I would have liked to photograph.

It should be remembered that many of the models pictured are made up of a special light alloy used for trial shots and 3D printed fittings. These can only suggest what the final product will look like. Even the fully painted models of unreleased items are hand finished production samples used to confirm that the model is ready to put into production and may not fully reflect the models when they go into production.

So starting with 1:43 scale. Here there was a display of all the expected re-coloured models. but also pre-production casting of the Bedford CF Ice Cream Van as shown below. Adrienne Fuller who is responsible for selecting cars and other vehicles for Oxford explained that although this is a quarter without many new 1:43 models they are still expecting to produce two to three entirely new castings in this scale this year in addition to recolours.

This mould by Oxford has really caught the look of the CF well. It should make an excellent model when it appears. It will be appearing in classic Mr. Whippy livery first, then Hockings but I am sure there will be more liveries over time especially as so many of this type of van were brought secondhand by small local firms across the UK.

The 1:43 scale Morris J2 minibus in Skyways livery from the final release of 2018 was shown and looks like an impressive model. Seen to the rear is another of the final release in 2018 the Fred Dibnah Lightweight Land Rover in 1:43 scale.

And now on to some very large 1:43 scale models. The new Weymann Fanfare South Wales – announced as an Oxford special to celebrate their 25 Years trading. The model shown below is a pre-production item and is fitted trial plastic components – the broken horn will not feature on the production model! The model features a plastic upper section with a diecast chassis. It is a striking model with the very high level of moulded and printed detail they can achieve when using plastic.

The South Wales version is not to be the only use of this moulding. Oxford were showing a Southdown version which has been announced as part of release one 2019. With a destination board for Bournemouth this model suits the Southdown livery well.

Moving on to 1:76 scale there were some interesting recolours shown. Below is another version of the J4 this time as an Austin J4 in BMC Parts livery due for later release. This is a nice livery and the Austin version of the grille seems to be very well printed.

The forthcoming Volkswagen Transporter T4 Camper looks very good and will be a popular model.

Oxford’s Transporter T1 Camper and Samba Bus in 1:76 scale both showed up looking ready to be put into production. Photographs are shown below.

Another re-use of a casting is the relatively new Leyland Sherpa now seen in Egyptian telephone livery, as seen in a well known Bond film. This model is sure to be popular even without film themed packaging. I hope that this casting soon gets used to produce models of vehicles used by the UK utilities firms.

We also saw test shots for the Volkswagen T5 Transporter which will be seen in various forms and also in a set which includes one of each generation of the Transporter from T1 to T5. Below we have test shots of the California camper

Shown below are test shots of the T5 van which will appear in several liveries starting with that of the RAC. I am sure that this will be seen in a wide range of liveries for current users.

Oxford often show models in a very early stage of development before they are announced. The Volkswagen T1 camper with surf boards shown below does not seem to exist in any current release but I am sure that we will see it in the future.

The Volkswagen T1 van casting get another release this year in Coca Cola livery. The test shot below shows the roof display with an advertising bottle on the roof.

One of the model sets which created a lot of interest when announced in the last release of 2018 was the RAF Bloodhound missile set. This was released by Corgi in the 1960s and by Airfix too. Here we have the new 1:76 scale from Oxford. The accompanying Land Rover has been well finished in RAF blue and markings.

This will make an impressive set re-creating the Jet Age long before Cruise missiles and Polaris carrying submarines.

The Oxford 1:87 scale range of US vehicles has been a strong seller. And the display showed some due for early release and others in early pre-production form.

The new Chrysler 300 Convertible can be seen in the photographs below. This casting looks good in red and the printed silver and badging looks like it could be very well done.

The forthcoming Dodge Charger Daytonas were also shown and are impressive in this scale.

The ‘standard’ Dodge Charger was shown too and looks good. It is interesting that it has been modelled with the headlights showing as many models of this car have the headlights in their concealed position.

Another model close to release is the De Soto Suburban with its roof rack. This is a rather earlier car than many in this range so it will be interesting to see if models from this period sell well. A taxi version is expected later.

Another model due soon is the Dodge D100 Sweptside which is due for release soon. The model looked very well finished and US pickups make for popular models so I expect it may sell out quickly. It is interesting that the rear seems to be a separate moulding so we may well see more variations on the D100.

Here we see very early test shots of the 1954 Pontiac Chieftain with a siren fitted to the roof. The model has been announced for release 1 2019 in two tone blue as a standard sedan so presumably police and possibly fire versions will follow later in the year.

Another very early casting shot is the Cadillac Eldorado Brougham 1957 again announced in release 1 2019. Reminiscent of the contemporary Matchbox model this is slightly smaller but promises to be impressive even in this smaller scale.

Another announced recently as part of Release One 2019 is the Chevrolet Panel van. The model may be released as an Ambulance first but clearly a van will also be forthcoming and I expect this to appear in several classic american liveries.

The early shots below show that Oxford have captured this classic 1950s van very well.

The final test casting on display in this scale is the Chevrolet Corvair Coupe announced recently. Even though this is an early shot it shows the potential for this to be a really nice model. The coupe also came in some very nice paint finishes so hopefully Oxford will be able to release it in several different authentic versions.

Oxford’s 1:148 scale range is another with upper components made in plastic. On show were some pre-production trials. These are interesting as they are made in clear plastic with 3D printed parts as shown in the photographs below.

First we have the Land Rover Discovery 4.

Then the Shelvoke & Drewry Freightlifter which is to appear in British Railways Western livery in 2019.

Presumably the photographs below show the pre-production test for the recently announced Hants and Dorset Bristol MW6G.

And finally in this scale the Green Goddess fire appliance expected in National Fire Service livery.


Unfortunately although samples of the new Citroën H catering van were there I did not photograph them.

I would like to thank Oxford Diecast for sharing so many pre-production and test models with us, and for so patiently getting models in and out of cabinets to allow me to photograph them.


We welcome your comments and questions.   Please go to our Model Auto Review Facebook page,  or email us at maronlineeditor at gmail.com.